Find the cause before it grows
A toilet can fail in a handful of familiar ways — some need a simple part swap, others signal a deeper drain or plumbing problem. We handle running toilets, clogs, leaks, weak flushing, loose toilets, and tank trouble, plus full replacement, for Palm Coast homes and businesses. If yours is running, leaking, clogged, or flushing poorly, call (386) 353-9386.
Toilet troubles we fix
Some are quick part swaps; others hint at a deeper drain problem.
Running toilets
A toilet that keeps cycling after a flush usually has a worn flapper, faulty fill valve, bad flush-valve seal, tangled chain, or water set too high — and it can waste a remarkable amount of water over time.
Clogged toilets
Some clogs yield to a plunger; others return again and again or refuse to budge. We clear slow drains, partial blockages, and backups — and check whether a bigger drain problem is behind them.
See Drain Cleaning →Leaks at the base
Water pooling at the base usually points to a worn wax ring, loose bolts, a damaged flange, or a failing seal. Don’t brush it off — water creeps under flooring and rots the subfloor.
Weak or low flush
A partial clog, low tank level, worn flapper, mineral-choked rim jets, or a drain-line issue can all sap flushing power. If you’re flushing twice to get the job done, the toilet needs a look.
Toilet tank problems
A failing flapper, fill valve, flush valve, handle, chain, or overflow tube brings running water, slow refills, weak flushes, or phantom flushing. Most of the time, it’s very repairable.
Wobbly or loose toilets
A rocking toilet works its seal loose, opening the door to base leaks and floor damage. We reseat the toilet solidly and replace the seal when it’s needed.
Cracked tank or bowl
Cracks are the serious one — a hairline can seep for months or give way without warning. A cracked toilet is usually better replaced than repaired.
Supply line & shut-off valve
The supply line or shut-off valve behind the toilet can leak too. A stuck, dripping, or failing valve should be repaired or replaced before it soaks the wall or floor.
See Faucet & Fixture Repair →Signs your toilet needs repair
A toilet usually gives you fair warning before things escalate.
The toilet keeps running
Water is probably slipping from the tank into the bowl, or the fill valve isn’t shutting off. It’s one of the most common toilet repairs we do.
Water pools around the base
The wax seal may have given out — or the culprit is a loose connection, a cracked bowl, or the supply line. Don’t write it off as condensation; a base leak wrecks flooring.
The flush is weak
Low tank level, a tired flapper, mineral buildup in the rim jets, or a partial clog. When weak flushing keeps coming back, the drain line itself may be the problem.
The bowl rises or drains slowly
A bowl that fills too high, drains sluggishly, or flirts with overflowing may be clogged — or the drain line may be restricted. If the water keeps climbing, stop flushing.
The toilet rocks or moves
A toilet should sit rock-solid. Any rocking grinds down the wax ring and lets water leak underneath — get it reset before the floor pays the price.
Phantom flushing or higher bills
A tank that refills by itself is leaking silently from tank to bowl. A running toilet can pour water away for weeks before anyone notices.
What makes sense for your toilet
Not every toilet problem calls for a new toilet — repair is the practical answer in plenty of cases.
When repair makes sense
The toilet is in good condition and the problem is limited to one part.
When replacement may be better
The toilet has a bigger issue or keeps causing problems.
Why small toilet problems get worse
Toilet trouble looks minor — until the repair bill says otherwise.
A running toilet wastes water
It can run up the meter around the clock — painful in rentals, vacation homes, and busy households where nobody sticks around to hear it.
A base leak damages flooring
A small leak migrates under the toilet into flooring, subfloor, and trim. In this humid climate, trapped moisture also breeds musty odors.
A weak flush can mean a drain issue
Sometimes it’s a simple tank fix — but frequent clogs or slow draining point further down the line, where drain cleaning may be the real answer.
A loose toilet breaks the seal
A rocking toilet chews through its wax ring. Once that seal fails, every flush sends water underneath.
Hidden water waste adds up
A toilet can leak tank-to-bowl in total silence — nothing on the floor, but the meter keeps spinning. Leak detection can track down hidden water waste.
What to do if a toilet overflows
An overflowing toilet spreads water and waste fast. If it’s safe to act, take these steps.
Stop flushing
Don’t hit the handle again — one more flush can turn a mess into a flood.
Turn off the toilet valve
Find the small shut-off valve behind or beside the toilet and turn it clockwise to cut water to the tank.
Lift the tank lid
If the tank is still filling, lift the lid and gently raise the float to slow or stop the flow.
Keep people away
If wastewater has reached the floor, keep kids and pets clear of the area.
Call for help
Call (386) 353-9386. If water or waste keeps spreading, see our emergency plumber page for urgent help.